-Please read the articles on this page in order to understand the complete usage process of the C220-P powder cleaning station.
¶ C220-P Cleaning Station Getting Started
- Product Introduction
- Product Illustration
- Power Supply
- Tools
- Unboxing Warnings
- Security Statement
- Accessories List
- Work Area-Requirements
¶ How to Use the C220-P Cleaning Station
This section will guide you from unpacking and assembling the printer to your first print. Please follow the steps in this section to complete your first use of the RMS220.
¶ C220-P Cleaning Station Unpacking
¶ Installation
- Installation Required Accessories
- Install The Tower Light
- Install The Touchscreen
- Install The ToolShelf
- Install The Sieve
- Install The Weighing Mechanism
- Install The Powder Cartridge
- Install The Adjustable Armrest Toolbox
- Install The Electrostatic Wrist Strap
- Connect The Vacuum Cleaner and Air Gun
- Install The Transparent Protective Cover
¶ First Use
- C220-P Cleaning Station Interface
- Powering On The C220-P Cleaning Station
- Level The C220-P Cleaning Station
¶ Prepare The New Powder
¶ Post-printing Processing
¶ FAQ
¶ Service and Support
If you encounter hardware or software problems that are not mentioned in this manual when using the RMF220, or need to order spare parts, please contact Raise3D for after-sales support:
| Region | Phone | Email/Support Tickets |
|---|---|---|
| US | +1 888 963 9028 (9:00 a.m-5:00 p.m.) |
support.raise3d.com |
| China | +86 400 6367 888 (9:00 a.m-6:00 p.m.) |
support@f3dp.cn |
| Europe | - (9:00 a.m-6:00 p.m.) |
support@raise3d.eu |
When you contact after-sales support, please make sure to provide the device firmware version number and device serial number. If you need to order spare parts, please also provide the invoice number or contract number.
¶ Read and Retain Disclaimer
Before using the Raise3D C220-P Cleaning Station, please carefully read and fully understand the contents of this manual, especially all safety precautions. Ignoring these instructions may result in serious injury or even death. Please retain all safety information and operating instructions for future reference and share them with other users as needed. To avoid fire, explosion, electric shock, or other accidents that could result in property damage or serious injury, strictly follow all operating procedures in this manual.
Raise3D assumes no responsibility for any damage to the device or personal injury caused by improper operation or failure to follow safety instructions, and the associated warranty will automatically become void.
¶ Warranty
This product is covered by a warranty. Please carefully read the warranty terms to understand the specific warranty policy and coverage applicable to your region.