-
Open the latches. There are four latches on the box, two on each side. Cut the cable ties with scissors, then twist open the latches.
-
Carefully lower the flip panel. Remove the protective foam from the side.
-
Two people are needed to lift the wooden box by lifting the handles on both sides and carrying it away from the equipment.
-
Remove the vacuum packaging from the outside of Build Unit 220.
-
Unlock the caster lock and push the Build Unit 220 away from the base.
-
Remove the cable ties securing Build Unit 220.
-
Remove the cable ties and protective film from the Build Unit 220.
-
Take the power cord and adapter from the build platform.
-
Insert the power connector into the right-side of Build Unit 220.
-
长按上/下按钮，检查成型平台能否顺利上下移动。成型平台首次上下移动时有轻微摩擦声是正常情况。
-
检查橡胶贴条是否贴紧缸壁没有缝隙。如果有缝隙请联系售后人员。
